Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a25df30ef834c60e

Jump to content

// Workers AI · dad joke modeWhat did the electrodynamic wheel say? I'm attracted to you.

From Wikipedia, the free encyclopedia
(Redirected from Electrodynamic wheels)

An electrodynamic wheel is a type of wheel proposed for use in electrodynamic levitation of the maglev train transport system.[1][2][3]

Unlike a conventional wheel, an electrodynamic wheel has a rim studded with magnets of alternating poles. As the wheel spins, which is done at a rate so that there is slip between the rim and the guideway's surface, magnetic fields are induced in the conductive guideway, which repels the wheel.

Depending on the spin, electrodynamic wheels can provide propulsion, braking, control, and lift.

Using 2D model

[edit]

The mechanical rotation of a radially positioned permanent-magnet Halbach array above a conducting, nonmagnetic track induces eddy currents in the track that can inductively create suspension and propulsion forces simultaneously. The parameters that affect the performance of this electrodynamic wheel are studied using a 2-D steady-state finite-element method.

Examples

[edit]

The Hendo hoverboard uses electrodynamic wheels to levitate itself over a conductive surface.[4]

See also

[edit]

References

[edit]
  1. Bird, J. "An Electrodynamic Wheel with a Split-Guideway Capable of Simultaneously Creating Suspension, Thrust and Guidance Forces" (PDF). University of Wisconsin-Madison. Archived from the original (PDF) on 29 October 2013. Retrieved 20 December 2012.
  2. J, Bird. "A Study of the Effect of Using Electrodynamic Wheels in Series" (PDF). University of Wisconsin-Madison. Archived from the original (PDF) on 29 October 2013. Retrieved 20 December 2012.
  3. Bird, J.; Lipo, T.A. (August 2007). "Characteristics of an Electrodynamic Wheel Using a 2-D Steady-State Model". IEEE Transactions on Magnetics. 43 (8): 3395–3405. Bibcode:2007ITM....43.3395B. doi:10.1109/TMAG.2007.900572. S2CID 22675786.
  4. US 9148077, Henderson, D. Gregory, "Magnetic levitation of a stationary or moving object", published 2015-09-29, assigned to ARX PAX LLC