Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a23fd91afa46d858

Jump to content

Ditto (drive)

From Wikipedia, the free encyclopedia
(Redirected from Ditto drive)
An Iomega Ditto internal drive with a 2GB tape and case.
An earlier Iomega Tape 250 drive

The Ditto drive series was a proprietary magnetic tape data storage system released by Iomega during the 1990s. It was marketed as a tape backup device for personal computers.

They were released in several capacities ranging from the original Ditto 250 drive (250MB compressed capacity per cartridge) to the DittoMAX drive, a compatible format with compressed capacities up to 10GB per cartridge. This was accomplished by increasing the physical size of the cartridge (making it longer). Some versions of the drive were also able to read Travan-type tapes.

Technical aspects

[edit]

Ditto internal drives were connected through the floppy drive channel and used MFM encoding to store data (the same method as on older floppy drives). An ISA accelerator card called the Ditto Dash, providing higher speed than a stock floppy controller, was also available.

Ditto external drives were connected to the parallel port and offered a print-through port which allowed a printer to operate while daisy-chained to the Ditto drive. This is a feature also commonly found on an Iomega ZIP drive. Usage of the parallel port allowed for transfer speeds (in EPP mode) of a maximum 1 MB/s.

Discontinuation

[edit]

In 1999, Iomega sold the Ditto brand and technology to Tecmar and exited the tape drive business.

The Ditto series has been discontinued. The need for higher capacities has made the Ditto series obsolete. The slow bandwidth of the Ditto also limited its usefulness compared to the Iomega REV or the older (and discontinued) Iomega Jaz.

Models

[edit]
  • Tape 250 - Released in 1992. Compatible with Irwin's EZTape [1]

Compatibility between tapes and drives

[edit]
QIC Travan Iomega Ditto
208021202120XLQW512230003000XL3010XL3010XLF30203020XL3020XLF TR-1TR-2TR-3 2GBMax 3GB3.7GBMax 5GBMax 7GBMax 10GB
Tape 250 R/W/FR/W/FR/W
Tape 420 R/W/FR/W/FR/W/FR/W/F
Ditto 800 R/W/FR/W/FR/W/FR/W/F R/W/F
Ditto 510 RRR/W/FR/W/F
Ditto 700 RRR/W/FR/W/F
Ditto 850 RRRR/W/FR/W/FR/W/F
Ditto 1700 RRRR/W/FR/W/FR/W/FR/W/FR/W/FR/W/F
Ditto 3200 RRRRRR?R/W/FR/W/F RRR/W/F
Ditto 2GB RRRRRR?R/W/FR/W/F RRR/W/F R/WR/W
Ditto Max RRR RR/WRR/WR/WR/W
Ditto Max Professional RRR RR/WRR/WR/WR/W

Notes:

R - read capable
W - write capable
F - format capable
  • The capacity figures used in the product names above are double the actual (native) capacity. Iomega and other manufacturers assume 2:1 data compression.
  • Ditto Max requires version 3.2 Pro of the Iomega backup software to support the Ditto Max 10GB tape cartridge.
  • Above data gathered from.[2]

References

[edit]
  1. "Iomega sets challenge to Irwin in removable QIC tape drives - Iomega Corp.'s Iomega Tape250 removable quarter-inch cartridge tape drive poses challenge to Irwin Magnetic Systems Inc.'s product - Product Announcement | Electronic News | Find Articles at BNET.com".
  2. "Tape Standards and Compatibility for the Ditto drive". iomega-na-en.custhelp.com. Retrieved 27 January 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
[edit]