Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a4652fa199f5ea0a

Jump to content

// Workers AI · dad joke modeWhy was Dinitroaniline a good dancer? It had a blast moving.

From Wikipedia, the free encyclopedia
(Redirected from Dinitroanilines)

Dinitroanilines are a class of organic compounds based on dinitroaniline, with the chemical formula C6H3(NO2)2NH2. Six isomers exist depending on the relative positions of the amino (NH2) and nitro (NO2) groups: 2,3-dinitroaniline, 2,4-dinitroaniline, 2,5-dinitroaniline, 2,6-dinitroaniline, 3,4-dinitroaniline, and 3,5-dinitroaniline. An organic compound with a dinitroaniline group is also said to be a dinitroaniline.

Uses

[edit]

Dinitroanilines are intermediates in the preparation of various industrial chemicals including dyes and pesticides.[1] During World War I, Germany used them as Ersatz high explosives.[citation needed]

There are many dinitroaniline herbicides, beginning with trifluralin in 1964. These are all 2,6-dinitroanilines, and work by inhibiting microtubule formation, have low to moderate human toxicity, high aquatic toxicity and are usually applied pre-emergently, often to control grasses and broad-leafed weeds. They include benfluralin, butralin, chlornidine, dinitramine, dipropalin, ethalfluralin, fluchloralin, isopropalin, methalpropalin, nitralin, nitrofor, oryzalin, pendimethalin, prodiamine, profluralin, and trifluralin. Trifluralin, pendimethalin are the most widely commercially used.

Preparation

[edit]

2,4-Dinitroaniline can be prepared by reaction of 1-chloro-2,4-dinitrobenzene with ammonia or by acid hydrolysis of 2,4-dinitroacetanilide.[2][1]

2,6-Dinitroaniline can be prepared in a multistep process involving nitration and sulfonation of chlorobenzene.[3]

Reactions

[edit]

A characteristic reaction of the dinitroanilines is their reduction, first to the diamine, then to the triamine, and finally to the triaminocyclohexanes. Selective conversion to the diamine can be achieved using sulfide as a reducing agent.[4] Hydrogenation over nickel or palladium catalysts gives triaminobenzenes. Still further hydrogenation (of the ring) affords the triaminocyclohexanes.

Examples

[edit]
Dinitroanilines
Chemical name 2,3-Dinitroaniline2,4-Dinitroaniline2,5-Dinitroaniline2,6-Dinitroaniline3,4-Dinitroaniline3,5-Dinitroaniline
Alternate name 2,3-Dinitro-1-aminobenzene
2,3-Dinitrophenylamine
2,3-Dinitraniline
2,4-Dinitro-1-aminobenzene
2,4-Dinitrophenylamine
2,4-Dinitraniline
2,5-Dinitro-1-aminobenzene
2,5-Dinitrophenylamine
2,5-Dinitraniline
2,6-Dinitro-1-aminobenzene
2,6-Dinitrophenylamine
2,6-Dinitraniline
3,4-Dinitro-1-aminobenzene
3,4-Dinitrophenylamine
3,4-Dinitraniline
3,5-Dinitro-1-aminobenzene
3,5-Dinitrophenylamine
3,5-Dinitraniline
Chemical structure
CAS Number 602-03-997-02-9619-18-1606-22-4610-41-3618-87-1
26471-56-7 (isomeric mixture)
PubChem CID 136400 from PubChemCID 7321 from PubChemCID 123081 from PubChemCID 69070 from PubChemCID 136407 from PubChemCID 12068 from PubChem
Chemical formula C6H5N3O4
Molar mass 183.12 g/mol
Appearance colorless to yellowish combustible powder
Melting point 187.8 °C[5] 136 °C (decomp.)[6] 154–158 °C 160–162 °C[7]
Density 1.646 g/cm (50 °C)[8] 1.61 g/cm[5] 1.736 g/cm 1.601 g/cm (50 °C)[8]
Solubility soluble in water (1–2 g/L at 20 °C)
GHS hazard pictograms
GHS01: Explosive GHS06: Toxic GHS08: Health hazard GHS09: Environmental hazard[5] GHS01: Explosive GHS06: Toxic GHS08: Health hazard[6] GHS01: Explosive GHS06: Toxic GHS08: Health hazard GHS01: Explosive GHS06: Toxic GHS08: Health hazard[7]
H- and P-phrases H300, H310, H330, H373, H411 H302, H311, H332, H373 H301, H311, H331, H373 H301, H311, H331, H373
P260, P264, P273, P280, P284, P301+P310 P260, P301+P310, P320, P361, P405, P501 P261, P280, P301+P310, P311 P261, P280, P301+P310, P311

Safety

[edit]

Dinitroanilines can be explosive and flammable when exposed to heat or friction.

References

[edit]
  1. 1 2 Gerald Booth (2007). "Nitro Compounds, Aromatic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a17_411. ISBN 978-3527306732.
  2. ↑ WO 1991001292 Method for the Preparation of Nitroanilines
  3. ↑ Harry P. Schultz (1951). "2,6-Dinitroaniline". Organic Syntheses. 31: 45. doi:10.15227/orgsyn.031.0045.
  4. ↑ K. P. Griffin, W. D. Peterson (1941). "1,2-Diamino-4-Nitrobenzene". Organic Syntheses. 21: 20. doi:10.15227/orgsyn.021.0020.
  5. 1 2 3 Record in the GESTIS Substance Database of the Institute for Occupational Safety and Health
  6. 1 2 Record in the GESTIS Substance Database of the Institute for Occupational Safety and Health
  7. 1 2 "3,5-Dinitroaniline". Sigma-Aldrich.
  8. 1 2 C. L. Yaws (2008). Thermophysical properties of chemicals and hydrocarbons (1st ed.). New York: William Andrew Inc. p. 221. ISBN 978-0-815-51596-8.