Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a23f20239c74b7b5

Jump to content

// Workers AI · dad joke modeWhat did the Betts electrolytic process say? I'm a shocking method.

From Wikipedia, the free encyclopedia
(Redirected from Betts process)

The Betts electrolytic process is an industrial process for purification of lead from bullion. Lead obtained from its ores is impure because lead is a good solvent for many metals. Often these impurities are tolerated, but the Betts electrolytic process is used when high purity lead is required, especially for bismuth-free lead.[1]

Process description for lead

[edit]

The electrolyte for this process is a mixture of lead fluorosilicate ("PbSiF6") and hexafluorosilicic acid (H2SiF6) operating at 45 °C (113 °F). Cathodes are thin sheets of pure lead and anodes are cast from the impure lead to be purified. A potential of 0.5 volts is applied. At the anode, lead dissolves, as do metal impurities that are less noble than lead. Impurities that are more noble than lead, such as silver, gold, and bismuth, flake from the anode as it dissolves and settle to the bottom of the vessel as "anode mud." Pure metallic lead plates onto the cathode, with the less noble metals remaining in solution. Because of its high cost, electrolysis is used only when very pure lead is needed. Otherwise pyrometallurgical methods are preferred, such as the Parkes process followed by the Betterton-Kroll process.[2][3][4]

History

[edit]

The process is named for its inventor Anson Gardner Betts who filed several patents for this method starting in 1901.[5][6]

See also

[edit]

References

[edit]
  1. Charles A. Sutherland, Edward F. Milner, Robert C. Kerby, Herbert Teindl, Albert Melin Hermann M. Bolt "Lead" in Ullmann's Encyclopedia of Industrial Chemistry, 2005, Wiley-VCH, Weinheim. doi:10.1002/14356007.a15_193.pub2
  2. Samans, Carl H. Engineering Metals and their Alloys, 1949 MacMillan
  3. Ojebuoboh, Funsho K. (1992). "Bismuth—Production, properties, and applications". JOM. 44 (4): 46–49. Bibcode:1992JOM....44d..46O. doi:10.1007/BF03222821. S2CID 52993615.
  4. Betts, Anson Gardner (May 2008). Lead Refining by Electrolysis. Read Books. ISBN 9781409730156.
  5. us 679824
  6. us 713278
[edit]